1. "Pulse spraying" function; With this function enabled, the electrostatic spraying machine uses the constantly changing electrostatic field to complete the powder spraying process, which can effectively solve the problems of high-pressure ignition and powder deposition at the head of the spray gun, and can improve the powder coating at dead corners.

2. "Automatic spraying" function; We add this switch for the purpose of reducing the labor intensity of the spraying operators on the production line. When the MA3300 is used for the long-term continuous production of the manual spraying assembly line, the operators do not have to tighten the trigger for a long time, which can effectively prevent the operators from hand fatigue and even occupational diseases.

3. "Back spraying" (secondary spraying function); In the production process of electrostatic spraying, it is inevitable that some workpieces will be found some defects after electrostatic spraying and curing and need to be reworked. At this time, the surface of workpieces will be difficult to powder because there has been a layer of coating. In the past, such situations must rely on the experience and technology of spraying operators and repeated fine tuning of spraying equipment, It can be solved by means of workpiece grinding, workpiece preheating, etc; However, for the MA3300, you only need to turn on the "back spray" function switch to spray the reworked workpiece easily. In practice, for the workpieces that have undergone electrostatic spraying (after curing) and whose surface is as smooth as a mirror, re spraying can be easily completed without sanding.

Spray processing Which one is good? Guangzhou Tuoshen Surface Treatment Co., Ltd. is the first choice. It is worthy of your trust. Welcome to inquire!