What's the difference between Tuoshen surface treatment sharing plastic spraying equipment processing and paint spraying processing? Next, Tuoshen surface treatment will analyze the difference between plastic spraying and spray painting.

I The plastic spraying process does not need solvents in its characteristics, reducing public hazards. It is well known that paint will pollute the surrounding environment during production, transportation and construction, and bring physical harm to operators. Plastic spraying is a powder coating, which does not contain any solvent, and is 100% solid paint. Its manufacturing, transportation, storage and construction solve the pollution problems caused by solvents, and improve the working conditions of operators, It is beneficial to the health of operators.

While painting processing requires complicated processes such as spraying primer and puttying, with a processing cycle of 7-10 days. The plastic spraying processing and coating only requires three processes, namely, spraying, curing and cooling. One film formation greatly simplifies the coating process, shortens the production cycle, and products can be produced on the same day. In electrostatic coating of powder coatings, automatic production can be formed by configuring automatic coating machinery and recycling system, thus saving energy and resources and improving production efficiency.  

2、 Spray painting is better than the leveling of plastic spraying.  

The molecular structure of the solvents, additives and resins used for paint spraying is very helpful for leveling. Wuchang spray molding processing factory has no spray molding, so it often has an orange effect.

Paint can be repaired.

In the process of painting, the pockmarks or scratches caused by excessive gas film can be repaired at any time, because the paint has the function of recoating. Spraying is not good.

The flexibility (bending) of paint spraying is better than that of plastic spraying.

Paint can be bent 1mm, or even T bent, but plastic spraying is not.

The painting is very decorative.

The appearance color of spray painting is dozens of times more than that of plastic spraying, and the same material can be made into different effects. For example, non-metallic materials such as plastic, wood, paper, cloth and leather can be made into aluminum.

The hardness of paint spraying is the same as that of plastic spraying.

The pretreatment cost of spray molding is low and faster than that of spray molding.

Spray molding must be baked at high temperature.

Plastic, wood, paper, cloth and leather cannot be baked at high temperature.

Spray paint delivery is fast, and even a small batch or special requirements can meet customer orders to the maximum extent.

Compared with plastic spraying, the surface quality of spray painting is easier to overcome the defects of substrate and meet the customer's quality requirements. If the surface of plastic spraying is not properly treated, it is easier to produce pitting defects (bubbles).

It is believed that most people should understand the difference between plastic spraying and painting after reading the above knowledge. Of course, this condition is suitable for individual workpieces, not to let plastic spraying replace painting. Some products still need to be selected.

The above is the information shared by Tuoshen Surface Treatment. If you want to know more, please follow us!