Guangzhou Tuoshen spray coating is used in the casting and forging industries. Because the working environment is dusty and easy to corrode, the wear and corrosion of mechanical parts will be serious, so metal thermal spray coating is needed at this time. It helps to repair these machines.
Sometimes it's hot Spray processing When the thermal spraying process loses its effectiveness due to some errors or reasons, don't worry. In general, we can use thermal spraying process to repair it when it is not serious. What are the methods? Let's analyze:
1. All kinds of dies can be repaired and repaired on site due to damage, strain, corner collapse, bruise, dent, etc!
After repair, the die will not be annealed, undercut or deformed. The bonding strength is metallurgical bonding except for the ion bond bonding of brush plating. The bonding strength is comparable to the matrix. After repair, the material and hardness can be selected according to the mold matrix!
Plastic injection mold, zinc base alloy plastic mold, TV case mold, tire mold, various injection mold cavities, telephone mold base, table tennis mold, telescope mold, tap water meter mold, plastic bucket, plastic cup and other plastic supplies mold, glass mold, cold stamping mold
2. All kinds of cement machinery can be mechanically repaired or repaired on site due to wear of shaft, hole, plane and profiled surfaces, failure of fitting position, wear of bearing position, seal position and bearing pad position!
For example: various crusher spindle bearing positions; Movable jaw bearing hole; Main shaft of various conveying fans (such as Roots blower); Rotor bearing positions of various motors; Bearing position of mill and reducer gear shaft;
The surface treatment and repair of the rotary surface of the rotary reamer, tower base, partition plate, lining plate scouring surface, etc., can be strengthened and strengthened. Many abrasions can be repaired on site!
All kinds of cement machinery can be mechanically repaired or repaired on site due to wear of shafts, holes, flat surfaces and abnormal surfaces, failure of mating positions, wear of bearing positions, sealing positions and bearing pads!
When Guangzhou Tuoshen Spraying carries out thermal spraying failure after thermal spraying processing, we need not be nervous, as long as we carefully repair it, everything will be fine.
Then in the textile industry. With metal thermal spraying, it can be widely used in the textile industry, and used in various wear-resistant coatings.
Moreover, in the paper machinery industry, it helps to thicken the inner wall, so that it can strengthen the repair, and its working life will be correspondingly extended, which is no doubt.
Secondly, in the metallurgical industry, the surface treatment of some metallurgical products is often properly treated to achieve the strengthening and repairing effect of the surface, which can also be seen.
Finally, in the power industry, metal thermal spraying can help strengthen the repair task of various equipment components.
Guangzhou Tuoshen Surface Treatment Co., Ltd. is the first choice for purchasing spraying, Guangzhou spray processing ， Huadu spray processing Factory, trustworthy.
