-
Guangzhou Tuoshen Surface Co., Ltd. is a professional metal products spraying processing enterprise, covering an area of 2800 square meters. The company mainly engages in hardware spraying, and has long-term cooperation with major enterprises in supporting processing. Its products involve hardware, electrical appliances, building materials, etc. The company now has 1 full-automatic production line and several detection instruments, including: 90
Published on: December 13, 2017 Number of hits: 693
-
Spraying construction has high technical requirements for operators. Operators must control the coating, spraying skills and curing temperature. None is dispensable. Once a problem occurs in a certain link, the spraying effect will be poor. In the process of spraying, the "oil leakage" fault is often encountered. What is the reason? The paint shrinks on the surface of the coated object
Published on: January 15, 2018 Number of hits: 340
-
With years of rich experience in the spray coating processing industry and technological progress, we have been trying in all aspects, making many improvements to the original problems. In order to achieve long-term development, we need to constantly change. Guangzhou Tuoshen Surface Treatment can create a great miracle in the new era& nbs
Published on: January 16, 2018 Number of hits: 276
-
ABS resin is one of the five major synthetic resins. It has excellent impact resistance, heat resistance, low temperature resistance, chemical resistance and electrical performance. It also has the characteristics of easy processing, stable product size, good surface gloss, easy painting, coloring, and surface gold spraying
Published on: October 27, 2017 Clicks: 948
-
Metal spraying processing is mainly aimed at materials such as concrete. By effectively separating such materials, metal spraying processing realizes the reuse of materials, greatly saves resources, and improves production efficiency. Metal spraying processing also plays a very important role, which needs our attention.
Published on: March 12, 2018 Number of hits: 291
-
The price war of spraying processing is not advisable for short-sighted behavior. In the field of metal spraying processing marketing, the price war has always been a method that businesses are willing to adopt. Depending on the price war, they can effectively defeat the opponent and give a fatal blow to the opponent. However, the price war of spraying processing is short-sighted behavior and defeats others
Published on: March 14, 2018 Clicks: 318
-
The segmentation of the spraying processing market is not only a trend, but also a sign of the gradual maturity of the industry. The so-called segmentation of the metal spraying processing market is to divide the overall market that is difficult for manufacturers to serve due to the excessive scale into several sub markets with common characteristics according to the desire and demand of consumers& n
Published on: March 17, 2018 Number of hits: 357
-
Metal spraying processing focuses on a certain area and becomes a professional brand. The market capacity of metal spraying processing and the share of manufacturers are already very large. However, large and comprehensive brands pay attention to people without me, but not all can achieve people with me, so it is easy to fall into price competition and lose
Published on: March 16, 2018 Number of hits: 306
-
Spraying processing is mainly aimed at materials such as concrete. By effectively separating such materials, metal spraying processing realizes the reuse of materials, greatly saves resources, and improves production efficiency. Metal spraying processing also plays a very important role, which needs our attention&
Published on: March 19, 2018 Clicks: 201
-
Spray processing manufacturers sell directly, and the price will definitely save a lot. How can we find products with excellent quality and high price from more metal spray processing manufacturers? There are many kinds of spray processing and the quality is well arranged, so consumers are buying
Published on: March 21, 2018 Number of hits: 348
-
The spraying processing industry is developing rapidly, the market competition is becoming increasingly fierce, and the industry pressure is also growing. If metal spraying processing wants to occupy a corner in the complex market, it needs continuous efforts. Building a good reputation is the key to comprehensive competitiveness
Published on: April 3, 2018 Number of hits: 326
-
Spraying processing factory culture has the spirit of encouraging factory members to consciously work actively for the development of metal spraying processing factories. This incentive effect is due to the fact that metal spraying processing factory culture is a people-centered management. Paint processing manufacturers recognize the value of people and pay attention to people's thinking and behavior
Published on: April 2, 2018 Number of hits: 234
-
Only by introducing advanced technology can Guangzhou spray painting process stabilize the market: in a promising period of the global economy, the equipment industry with a larger stage has come to the best moment, and if you grasp it well, you can create more value. As a very important member of the market, the spraying equipment has always adhered to the principle of technology first. With such peers, there will be great competition pressure
Published on: April 16, 2018 Clicks: 211
-
Wooden lacquer once restricted its own way of implementation due to the downwind factors such as function and quotation. However, due to the increase in the price of raw materials, some oil coatings prices have increased, which can be said to have brought a little development to the water-borne coatings market. However, in terms of its function, Guangzhou Tuoshen Surface Treatment Co., Ltd. has many functional indicators inferior to traditional polyester paint, especially wood paint
Published on: 2018-05-21 Clicks: 222
-
Spray the UV paint of the processing manufacturer, that is, UV curable paint, also known as light triggered paint, UV curable paint. UV paint has the advantages of no volatile organic compounds (VOC), little environmental pollution, fast curing speed, energy saving, good curing product performance, and suitable for high-speed automatic production. But traditional coatings are easy to
Published on: June 22, 2018 Number of hits: 257
-
In the early 1980s, air spraying devices were eliminated abroad, and new processes such as high-pressure airless spraying, electrostatic spraying, electrophoretic spraying, electrostatic powder spraying, and high-temperature ion spraying were replaced, of which high-pressure airless spraying accounted for more than 80%. Polyresin modified heavy duty coatings have been widely used for internal wall coatings of oil and gas pipelines abroad
Published on: February 1, 2018 Number of hits: 297
-
Guangzhou Tuoshen spray coating is used in the casting and forging industries. Because the working environment is dusty and easy to corrode, the wear and corrosion of mechanical parts will be serious, so metal thermal spray coating is needed at this time. It helps to repair these machines. Sometimes some errors or reasons may lead to thermal spraying
Published on: January 2, 2018 Number of hits: 687
-
Guangzhou Tuoshen surface treatment is used in the casting and forging industries. Because the working environment is dusty and easy to corrode, the wear and corrosion of mechanical parts will be serious, so metal thermal spraying is needed at this time. It helps to repair these machines. Sometimes there are some mistakes or reasons during thermal spraying
Published on: January 12, 2018 Number of hits: 644
-
The coating processing manufacturer tells you the five key points of the spray free material injection molding process, including spray processing, Guangzhou spray processing, and Huadu spray processing. The spray free processing materials are used more and more widely, including rice cookers, pressure cookers, electric kettles, soymilk machines, washing machines, air conditioners, and other household appliances; Car pedal, glove box, sun visor, pillar
Published on: January 22, 2018 Number of hits: 298
-
Some workpieces require UV spraying processing to achieve the desired effect. However, the effect of UV spraying processing is not ideal because the construction process is not mastered, or the spraying materials and equipment are improperly selected. What factors are involved? One of the manifestations of the poor UV spraying processing effect of the workpiece is the poor adhesion of the coating, which may be the substrate
Published on: January 23, 2018 Clicks: 164
-
Through the comparison between the two, it can be clearly found that the aluminum alloy extruded profiles without surface treatment have a single appearance and are prone to corrosion in humid atmosphere. Therefore, in order to enrich the appearance of aluminum profiles and extend their service life, aluminum profiles generally need surface treatment, and aluminum profile spray processing is one of the more common surface treatment methods& n
Published on: January 24, 2018 Number of hits: 243
-
The purpose of spraying plastic products is to form a solid and continuous coating on the surface of the coated object through spraying operations, and play the role of plutonium loading, protection and special functions. Coating surface scaling: oxidation polymerization paint, alkyd resin and nitrocellulose paint or ammonia alkyd resin primer with more pigment components are easy to scale on the surface during storage. Generally, carbonates can be added
Published on: February 2, 2018 Number of hits: 301
-
In general, the coatings obtained by thermal spraying can not be directly used in many cases, such as anti-corrosion coatings, in which case a series of subsequent treatment must be carried out. It is obvious that the purpose of subsequent treatment is to prevent the corrosion medium in the coating from reaching the substrate through the pores of the coating, thus causing corrosion of the substrate. Follow up of coating after thermal spraying
Published on: February 5, 2018 Number of hits: 464
-
The plastic shell spraying process has high production efficiency and is suitable for manual operation and industrial automation production. It is widely used in hardware, plastics, furniture, military industry, ships and other fields. The plastic shell spraying process is the most widely used coating method nowadays; Fuel injection operation requires environmental requirements ranging from 10000 to 100
Published on: February 13, 2018 Number of hits: 274
-
Overview of rubber oil: rubber oil products commonly processed by spraying: PP rubber paint spraying, PC rubber paint spraying, ABS rubber paint spraying, PET rubber paint spraying, PA rubber paint, hardware rubber paint. Because the materials are different, special materials should be sprayed first
Published on: February 14, 2018 Number of hits: 348
-
1、 Spraying characteristics Air spraying is a widely used finishing process in the current paint coating construction. Air spraying is to use the airflow of compressed air to flow through the nozzle hole of the spray gun to form a negative pressure. The negative pressure causes the paint to be sucked in from the straw and sprayed out through the nozzle to form a paint mist. The paint mist is sprayed onto the surface of the painted parts to form a uniform paint film.
Published on: February 22, 2018 Clicks: 333
-
Spraying processing company teaches you how to use spray guns Spraying processing company introduces high-pressure airless spraying machine is a major classification of automatic spraying equipment. As the name implies, airless spraying machine has more advantages than traditional spraying machine. Whether it is a large painting operation or a small painting operation, it has high requirements on the coating quality of the spraying machine. How to paint best
Published on: February 26, 2018 Number of hits: 345
-
The spraying manufacturer will teach you how to repair the failure of the spraying process. Sometimes during the thermal spraying process, the thermal spraying process will lose its effectiveness due to some errors or reasons. Don't worry. Generally, we can use the thermal spraying process to repair it when it is not serious. What are the methods? Let's analyze together: 1. Spray processing
Published on: March 10, 2018 Number of hits: 287
-
The surface of most workpieces needs to be painted, and most of them can get good coating to improve the quality of workpieces. But sometimes I feel that the painting process is not very smooth, which leads to the problem of rough surface after painting, especially fluorocarbon painting. Why? The workpiece is processed by fluorocarbon painting, but when the paint film is dry
Published on: March 13, 2018 Number of hits: 266
-
There are many manufacturers specialized in large piece spraying processing in the market, and their respective technologies are different, but even so, the requirements for the maintenance of large piece spraying processing equipment and the quality of large piece spraying processing are the same, how to meet the requirements? For large pieces of spraying processing equipment, it is necessary to check whether there is any abnormality in the conveyor belt, and if there is, eliminate it in time
Published on: March 15, 2018 Number of hits: 346
-
In the past spray painting process, the specific operation process must be selected in combination with the type of paint. Because different paints have different performances, the applicable spray painting processing methods will be different, which is also the basic requirement to ensure that the quality of spray painting processing meets the standard. Use the commonly used chlorinated rubber paint
Published on: March 15, 2018 Clicks: 209
-
Electrostatic spraying has become a popular spraying processing method at present, not only because of its unique construction principle, but also because of its excellent construction effect. In addition, this spraying technology has different operation methods, providing users with more selectivity. Since there is no doubt about the electrostatic spraying process itself
Published on: March 22, 2018 Clicks: 205
-
The completion of the spraying process needs to meet many relevant process conditions, and the spraying pressure is one of them. Since the spraying pressure of the airless spraying machine is always lower than the output pressure, the pressure loss factor of the airless spraying equipment must be taken into account when determining the spraying pressure. During the spraying process, there are many factors of pressure loss, such as the pressure loss of paint conveying pipe
Published on: March 24, 2018 Number of hits: 208
-
At present, electrostatic spraying equipment has been widely used in the mechanical industry. Do you know what its characteristics are? Guangzhou Tuoshen Surface Treatment Co., Ltd. introduced that it has many characteristics, such as high construction efficiency, uniform and smooth wall coating, strong paint adhesion, high paint utilization rate, etc. Now let's have a detailed understanding!
Published on: March 26, 2018 Number of hits: 185
-
Metal painting pretreatment process control There are many processes for metal painting pretreatment, which can be selected according to specific conditions, such as plant conditions, i.e. space location size, workpiece materials (cold rolled plate, hot rolled plate, galvanized plate, aluminum alloy, glass fiber reinforced plastic, etc.), workpiece surface conditions (rust, antirust oil, sundries), production batch, quality requirements, etc. Different manufacturers
Published on: March 27, 2018 Number of hits: 336
-
It is easy to distinguish whether the spraying process is good or not, because the comprehensive performance of the coating can reflect this aspect, such as hardness. It is a comprehensive reflection of the coating for spraying processing, and also a comprehensive reflection of the metallographic structure, particle hardness, coating density, coating porosity, oxide inclusion, etc. of the metal particles for spraying processing. Therefore, metal particles, metallographic structure and spray processing
Published on: March 28, 2018 Number of hits: 212
-
Compared with the past, the efficiency of spray processing has been significantly improved, which is probably due to the gradual improvement of the automation of spray processing equipment. It can be seen that the key to improve the efficiency of spraying processing is the processing equipment, which should be improved. In order to promote the improvement of spraying processing efficiency, it is necessary to regularly check the spraying design used
Published on: March 30, 2018 Clicks: 180
-
Pre processing of spray processing The shared materials of spray processing are well combined and meet the needs of electrostatic spray processing. The substrate surface must be pretreated, including surface pre-processing, purification, roughening and bonding the bottom layer. Let's talk about it in detail. I hope it will be helpful to everyone& nbs
Published on: April 4, 2018 Number of hits: 307
-
Among many modern spraying technologies, metal thermal spraying processing is very popular among users. If you want to ask how its spraying effect is, it mainly depends on the skill level of operators, the nature of the coating used and other important factors. It seems that the paint discoloration after metal thermal spraying is also related to these two factors,
Published on: April 9, 2018 Clicks: 424
-
The so-called spraying process is to disperse the paint into uniform and fine droplets by means of the spray gun and air pressure, and apply them on the surface of the coated object at the same time. In addition, there must be more than one type and method of professional spraying processing, and different methods are required for different workpieces and requirements. Most of the paints used in professional painting processing are artificial paints
Published on: April 10, 2018 Clicks: 193
-
Air spraying is a widely used finishing process in the current paint coating construction. The air spraying process is to use the air flow of compressed air to flow through the nozzle hole of the spray gun to form a negative pressure. The negative pressure causes the paint to be sucked in from the straw and sprayed out through the nozzle to form a paint mist. The paint mist is sprayed onto the surface of the painted parts to form a uniform paint film. Air spraying
Published on: April 12, 2018 Clicks: 161
-
The annealing treatment of plastic spraying by the spraying processing manufacturer is to heat the ABS plastic molding parts below the thermal deformation temperature, that is, 60 ℃, and keep the heat for 2h. Degreasing treatment shall be carried out before plastic spraying. The plastic parts are usually cleaned with gasoline or alcohol, and then chemically degreased. After chemical degreasing, the residual lye on the surface of the workpiece should be thoroughly cleaned, and finally cleaned with pure water and dried
Published on: April 14, 2018 Number of hits: 439
-
The annealing treatment of plastic spraying by the spraying processing manufacturer is to heat the ABS plastic molding parts below the thermal deformation temperature, that is, 60 ℃, and keep the heat for 2h. Degreasing treatment shall be carried out before plastic spraying processing. The plastic parts are usually cleaned with gasoline or alcohol for spraying processing in Guangzhou, and then chemical degreasing. After chemical degreasing, the residual lye on the surface of the workpiece should be thoroughly cleaned, and finally cleaned with pure water
Published on: April 18, 2018 Number of hits: 256
-
There are several kinds of finish paint for spraying processing: ordinary paint; Metallic paint; Pearlescent paint. There is no need to mention ordinary paints, resins, pigments and additives. Aluminum powder is added to metal paint; So it looks bright after finishing. Pearlescent lacquer is added with mica particles. Mica is very thin, so the reflection has directionality, and there are color spots
Published on: April 19, 2018 Number of hits: 286
-
In this trend, the proportion of robot spraying is also increasing. For example, the 6-cup station or 9-cup station system that was commonly used in car body spraying has also been replaced by robot spraying. Robot spraying is also widely used for automobile body outer covering, for example, more than half of the domestic production of car bumper spraying
Published on: April 19, 2018 Clicks: 136
-
The spraying layer cannot accept impact load and high touch stress, and is suitable for touch cooperation on various surfaces. The spray melting layer has high contact strength, can accept impact load, can be used in line touch and other occasions, and can accept high touch stress. At present, thermal spraying technology has been widely promoted and used in China
Published on: April 21, 2018 Clicks: 139
-
Energy conservation and emission reduction is a major measure to implement the Scientific Outlook on Development and build a harmonious socialist society; It is an inevitable choice for building a resource-saving and environment-friendly society. As an automobile manufacturer, a resource-saving enterprise is an effective way to take a new road to industrialization and a fundamental requirement to enhance core competitiveness
Published on: April 23, 2018 Clicks: 148
-
1. In the process of spray processing, the parts are not heated more than 70~80 ℃, so the parts will not produce internal stress and deformation. 2. The thickness of spraying layer is much larger than that of electroplated layer, up to 10mm, sometimes up to 15-20mm. 3. According to the requirements of
Published on: April 25, 2018 Clicks: 184
-
Metal spraying means that after the coating material is melted by a certain heat source or in a molten state, it is blown into tiny particles by compressed atmosphere, plasma flow, or some combustible gases and their mixed gases and other high-speed airflow and sprayed onto the surface of the workpiece for pretreatment punishment. When the melted coating material collides with the appearance
Published on: April 25, 2018 Clicks: 139
-
Commentary on the hardness of coatings processed by thermal spraying 1. Large area long-term protection skills are widely used. For steel structures exposed to the outdoor atmosphere for a long time, the use of lead, zinc and their alloy coatings instead of traditional paint brushing methods to implement cathodic protection for long-term atmospheric corrosion prevention has been rapidly developed. Such as TV tower, bridge and highway
Published on: April 26, 2018 Number of hits: 308
-
Spraying method is one of the most important methods in the construction of water-based coatings. Guangzhou spraying processing uses spraying method to paint the surface of objects, which can obtain thin and uniform coating film. For places with different geometric shapes, small holes, gaps, and uneven surfaces, the coating can be evenly distributed; For spraying large object surface, this method is faster and more useful than brushing. But spraying for Guangzhou spraying processing
Published on: April 27, 2018 Clicks: 153
-
The spray printing system used for spray processing is electronic fuel injection. The basic feature of Guangzhou spray processing, a fuel injection engine, is that the working process of the engine is monitored in real time by the computer control unit, mainly according to the amount of air inhaled by the engine, air temperature, cooling water temperature, throttle opening, exhaust oxygen concentration, engine speed Sensor information such as explosion degree, control
Published on: April 28, 2018 Clicks: 197
-
Process rules for spraying and processing of metal structures: 1 Purpose To standardize the painting process of metal structures and ensure the correctness and effectiveness of paint spraying. 2. Scope of application This process operation specification is applicable to the coating of metal structural parts for our products and the surface coating of metal structural parts with special requirements. 3. Responsibilities 3.1 The production personnel of the production department shall follow the specifications
Published on: 2018-05-03 Clicks: 148
-
Plastic spraying processing can be divided into hole type, pin type and throttle type according to the head shape. The fuel injector below 4 holes is used for the semi open combustion chamber (see diesel engine); Most injectors with more holes are used in open combustion chambers. Each hole of the injector can eject a spray with a small cone angle and a long range. Number of holes, hole diameter and hole wall thickness
Published on: May 4, 2018 Number of hits: 297
-
What is spraying? Spraying process is a coating method that is applied to the surface of the coated object through a spray gun or a disc atomizer, with the help of pressure or centrifugal force, loose into uniform and fine droplets. It can be divided into various derived methods such as air spraying, airless spraying, electrostatic spraying, etc., such as large flow low pressure atomization spraying, thermal spraying, automatic spraying, multi group spraying, etc. Spraying work has high production efficiency
Published on: 2018-05-07 Number of hits: 215
-
The smaller the resistivity of the spray processing powder, the easier it is for the powder particles to discharge charges, reduce the adsorption force and easily fall off. Therefore, the greater the resistivity of the powder, the easier the saturation of the coating will be. The volume resistivity of general coatings is in the range of 109~1013 Ω· cm. The distance between the head of the spray gun and the workpiece is usually kept at about 150~200mm. The distance, angle and movement of the spray gun
Published on: 2018-05-08 Clicks: 192
-
In recent years, with the rapid development of plastic spraying industry and the continuous improvement of plastic properties, plastic parts spraying processing has been more widely used. Plastic spraying is replacing traditional metal parts in different fields. A reasonably designed plastic part can often replace multiple traditional metal parts, so as to simplify the product structure and save manufacturing costs. yes
Published on: 2018-05-09 Number of hits: 214
-
Powder spraying processing can minimize the water loss and size change of wood products in industrial application. The powder coating has been applied to the coating of metal substrates for a long time. In recent years, through the continuous efforts of the industry, the curing temperature has been reduced, and the spraying processing technology has been improved. The powder coating has been applied to medium density fiberboard (MDF) and other woods. Powder spraying
Published on: 2018-05-09 Number of hits: 226
-
It is hoped that this article can help customers who need it. Some of the spraying materials and products of the spraying processing factory are elastomer, and the sprayed coating should have sufficient expansion and change performance. Different plastic varieties also have different effects on the painting process before coating construction. Generally, the plastic surface is often stained with a trace of paraffin, petroleum or mineral grease, which has a certain impact on the adhesion of the coating. All kinds
Published on: 2018-05-18 Clicks: 197
-
Tuoshen Surface Treatment Co., Ltd. of Guangzhou Paint Processing Factory has strict 7S management requirements for the factory. Because the enterprise knows that lax management is irresponsible for employees, it pays special attention to the following four points: 1. Paint processing equipment is designed in accordance with national general safety requirements and professional safety requirements of paint processing safety regulations. For spraying
Published on: May 24, 2018 Number of hits: 169
-
The production of powder paint spraying room is a key process in the spraying process. The key to the quality of the sprayed profile surface is the control of various process parameters in the spraying process. Powder output and atomizing air are two key technical indicators. Before formal powder spraying, try spraying several times. At this time, observe the size of powder output and the uniformity of powder distribution at both ends of the spray room. At this time, the powder is at a distance of
Published on: May 25, 2018 Number of hits: 305
-
Like other surface treatment processes, spray processing can also bring different effects to the product surface. Even spray processing can help improve the internal performance of the product. When the spraying process is widely used in practical production, we should pay more attention to every detail in the operation process to ensure that we can obtain the ideal spraying process quality. The first choice is about spray processing
Published on: May 26, 2018 Number of hits: 212
-
When spraying the workpiece, it will produce some losses more or less, thus increasing the cost of spraying operations to a certain extent. In addition to the way of spraying and its loss, what other factors will affect the loss in spraying processing? Practice has proved that when users use brush coating and roller coating for spraying processing, the loss coefficient will be less. But when spraying without air
Published on: May 26, 2018 Clicks: 131
-
For the manual spraying machine, it can remove the rust and other dirt on the surface of the workpiece, and it will also establish an important basic pattern on the surface of the workpiece, that is, the rough surface, and we can use the manual spraying machine to change its abrasives with different particle sizes,
Published on: 2018-05-29 Clicks: 135
-
The main uses of spraying processing include the following aspects: for Guangzhou spraying processing, the external surface of parts can be cleaned and strengthened at first; After that, the cleaning and strengthening of fixtures and materials can also be realized; Parts before electroplating, oxidation and coating
Published on: 2018-05-31 Number of hits: 217
-
Abrasive control during spraying processing of metal steel structure shall pay attention to the sand used for rust removal during sand blasting processing. It is required that the particles are hard, angular, dry (water content<2%), and free of soil and other impurities; Quartz sand is preferred, and coarse river sand is also acceptable; At the same time, pay attention to the examination
Published on: 2018-05-31 Clicks: 204
-
Powder spraying has the tendency of caking at a certain temperature, which is mainly caused by the softening of resin, leveling agent and other materials in powder coating when heated. The powder coatings produced by our company are thermosetting powder coatings, that is, the resin as the main film-forming material is an organic high molecular polymer with low molecular weight. These resins have a physical property that at lower temperatures,
Published on: June 1, 2018 Clicks: 138
-
The production of powder paint spraying room of spraying processing manufacturers is a key process in the spraying production process. The key to the quality of the sprayed profile surface is the control of various process parameters in the spraying process. Powder output and atomizing air are two key technical indicators. Before formal powder spraying, the spray processing manufacturer can test spray several times. At this time, the size of powder output and the uniformity of powder distribution can be observed at both ends of the spray room
Published on: June 4, 2018 Clicks: 125
-
The production of powder paint spraying room is a key process in the spraying production process. The key to the quality of the sprayed profile surface is the control of various process parameters in the spraying process. Powder output and atomizing air are two key technical indicators. Before formal powder spraying, try spraying several times. At this time, observe the size of powder output and the uniformity of powder distribution at both ends of the spray room. The powder at this time is at a distance from the spray gun
Published on: June 8, 2018 Clicks: 227
-
The uneven coating is one of the defects in the spraying process. To solve this defect, we must first understand the causes. The following professional spraying processing manufacturer, Guangzhou Tuoshen Surface Treatment, will give you a simple analysis. The processed materials are improperly hung and arranged; Profile grounding is poor (some hangers are conductive (the term "conductive" is provided by industry encyclopedia)); Uneven conveyor chain speed
Published on: June 9, 2018 Clicks: 235
-
I hope this article can help customers who need it. Some of the spraying materials and products of the spraying factory are elastomers, and the sprayed coating should have sufficient expansion and change performance. Different plastic varieties also have different effects on the painting process before coating construction. Generally, the plastic surface is often stained with a trace of paraffin, petroleum or mineral grease, which has a certain impact on the adhesion of the coating. Various plastics
Published on: June 9, 2018 Clicks: 170
-
What is spraying? The coating method of loosely forming uniform and fine droplets on the surface of the object to be coated through a spray gun or a disc atomizer with the help of pressure or centrifugal force. It can be divided into various derived methods such as air spraying, airless spraying, electrostatic spraying, etc., such as large flow low pressure atomization spraying, thermal spraying, automatic spraying, multi group spraying, etc. The spraying work has high production efficiency and is suitable for
Published on: June 13, 2018 Clicks: 234
-
Now, with the improvement of various aspects, the spraying processing industry in China has now embarked on the right track and is developing in a higher direction. Recently, it was learned from relevant experts that the current difficulties faced by Guangzhou spraying processing plant are as follows: First, from the perspective of all the needs of the manufacturers, the production efficiency of the current spraying industry is not so great
Published on: June 21, 2018 Clicks: 193
-
In this trend, the proportion of robot hardware spraying is also increasing. For example, the 6-cup station or 9-cup station system, which was commonly used in the car body hardware spraying, also tends to be replaced by robot hardware spraying. Robot hardware spraying is also widely used for automobile body outer covering, such as domestic car insurance
Published on: June 25, 2018 Clicks: 172
-
Paint processing factory reveals the difference between baking paint and spray paint! We must see a lot of oil spray products in our life. In fact, what are the invisible essential differences between baking paint and spray paint? Most of them are spray paint in shopping malls now, but many people think it is baking paint. What is the reason? Paint baking is different from spray painting, but the current spray painting skills are also very good,
Published on: June 28, 2018 Clicks: 179
-
Guangzhou Tuoshen, the Guangzhou spray processing manufacturer, reminded seven problems that should be paid attention to in the spray booth during spray processing. The production of powder paint spray booth is a key process in the spray production process. The key to the quality of the surface of the spray profile is the control of various process parameters in the spray process. Powder output and atomizing air are two key technical indicators. Before formal powder spraying, try spraying several times. At this time
Published on: July 2, 2018 Number of hits: 170
-
Metal painting pretreatment process control There are many processes for metal painting pretreatment, which can be selected according to specific conditions, such as plant conditions, i.e. space location size, workpiece materials (cold rolled plate, hot rolled plate, galvanized plate, aluminum alloy, glass fiber reinforced plastic, etc.), workpiece surface conditions (rust, antirust oil, sundries), production batch, quality requirements, etc. Different manufacturers adopt
Published on: July 3, 2018 Number of hits: 166
-
The wear surface failure of equipment parts is the main cause of equipment aging and failure. In order to prolong the service life of the equipment and postpone the aging process, the common method in the past is to carry out surface carburizing and surface quenching. In order to further improve the wear resistance of parts, save materials and reduce costs, both at home and abroad have tested to cover the surface of parts with a layer in the past decades
Published on: July 4, 2018 Number of hits: 176
-
Flame spraying, arc spraying, plasma spraying, explosive spraying and supersonic spraying are widely used in thermal spraying process. Flame spraying is realized through a flame spray gun, which separately introduces acetylene, oxygen or compressed air through a gas valve. Acetylene and oxygen are mixed and burned at the nozzle outlet
Published on: July 7, 2018 Clicks: 143
-
Someone asked, why should hardware be sprayed? What will this do? Let's tell you from our editor, because hardware products are made of pure chemical elements, which are easily corroded by other substances in the air. In this way, our use will lead to the longevity of such hardware products
Published on: July 13, 2018 Clicks: 136
-
Treatment of common spray phenomena of spray processing manufacturers 1. Appearance: reason for graining: the operation site is dirty, and dust is mixed into the paint; After the paint is distributed for too long, the paint and curing agent have copolymerized particles; The oil output of the spray gun is too small, and the air pressure is too high
Published on: July 21, 2018 Number of hits: 166
-
1. Poor powder fluidization, lack of air pressure: the air filter must be cleaned, and the pressure should be properly added. Powder agglomeration: the powder needs to be filtered loose manually. Too much powder loading in the fluidized bed will also affect the powder fluidization. At this moment, the powder loading in the fluidized bed should be reduced. Generally, the powder dosage is 2/3 of the volume of the fluidized bed. 2. Powder blocking gun powder fluidization is not good:
Published on: July 23, 2018 Clicks: 132
-
The methods for rust removal and anti-corrosion treatment of stainless steel surface by spraying processing are as follows: Guangzhou spraying processing, Huadu spraying processing, wire drawing processing, radium carving processing, spraying processing, aluminum products oxidation processing, aluminum oxidation plant, aluminum alloy anodizing, aluminum oxidation processing, aluminum anode oxidation, aluminum oxidation plant methods -:
Published on: July 31, 2018 Clicks: 142
-
Spray machining equipment, as a conventional abrasive jet technology, has been continuously developed, improved and perfected. With its unique machining mechanism and wide range of processing and application, it is more and more popular in today's surface treatment industry, and has been widely used in machinery manufacturing, instrumentation, medicine
Published on: August 1, 2018 Clicks: 268
-
There are two major factors in the analysis of the factors that cause shrinkage in the coating process of the hardware spraying assembly line: first, the factors of the coating itself. 2、 Elements in the painting process of the painting assembly line. 1、 The elements of the coating itself are as follows: 1. In the process of coating production, the amount of leveling agent, defoamer and other additives cannot be loose or uneven
Published on: August 4, 2018 Number of hits: 159
-
The Mid Autumn Festival is a traditional festival in China. According to historical records, the term "Mid Autumn Festival" first appeared in the book "Zhou Li". In the Wei and Jin Dynasties, there was a record that "the imperial edict was issued to stop cattle being confused, and the Mid Autumn Festival Eve and the left and right sides of the river were slightly dressed". It was not until the early Tang Dynasty that the Mid Autumn Festival became a fixed festival. The Book of the Tang Dynasty Taizong Records records the Mid Autumn Festival on the 15th day of August. The popularity of the Mid Autumn Festival began in the Song Dynasty and lasted until
Published on: September 24, 2018 Number of hits: 167
-
The spraying layer can not bear impact load and high contact stress, and is suitable for various surface contact cooperation. The spray melting layer has large contact strength and can withstand impact load. It can be used in line contact and other occasions and can withstand high contact stress. Guangzhou Paint Processing Factory
Published on: October 23, 2018 Clicks: 172
-
Characteristics of insulation spraying processing board: the maximum allowable working temperature in the air is very high, which can continue to work at 220 ℃, and can reach 260 ℃ in a short time. It can maintain high mechanical strength, stiffness and hardness in a high temperature environment, and has excellent chemical corrosion resistance and hydrolysis resistance (at present, no solvent that can dissolve polyphenylene sulfide below 200 ℃ has been found, which is extremely resistant to inorganic acids, alkalis and salts),
Published on: April 9, 2019 Clicks: 223
-
What should be paid attention to during thermal spraying process? 1、 Respiratory protection. The spraying operation requires the operator to use respiratory protection devices. Depending on the nature, type and size of the dust gas, determine what kind of respiratory protection device to use. For spraying in a limited or sealed space, a continuous airflow channel respirator is required. 2、 Protective clothing. Any spraying or sand blowing requirements
Published on: April 16, 2019 Number of hits: 297
-
Energy conservation and environmental protection is a cause we should always adhere to, and reducing environmental pollution is also a problem we should always improve. 1. Reciprocating machine is a moving machine, so it is not allowed to enter the frame of the equipment as long as the equipment is powered on. 2. Causes affected by industrial field interference or equipment failure and misoperation
Published on: August 9, 2018 Clicks: 141
-
Hardware spraying factory reveals the difference between baking paint and spray paint. Our spraying factory, Guangzhou Tuoshen Surface Treatment Co., Ltd., must see a lot of oil spraying products in life. In fact, what are the invisible essential differences between baking paint and spray paint? Now most of the shops are spray painting houses
Published on: August 20, 2018 Number of hits: 238
-
A brief talk on the difference between spray painting and powder spraying; spray painting and powder spraying are two completely different painting methods, and the spray painting processing plant will talk about their differences, Spray painting is to use compressed air to disperse liquid paint (commonly known as paint mist particles to adhere to the surface of the coated object), while powder spraying is to use compressed air to disperse powder mist particles under the action of high-voltage electrostatic force and absorb them through electric field
Published on: August 23, 2018 Clicks: 226
-
The vacuum negative pressure casting infiltration process of spraying processing is a complex flow process of liquid metal between porous loose particles under the effect of negative pressure suction. The basic principle of metal spraying processing is that the vacuum negative pressure makes the metal liquid penetrate into the alloy coating through the pores, surrounding the alloy particles. Dust free spray processing is under the joint action of flux and other additives, through a series of high-temperature metallurgical physicochemical reactions
Published on: August 27, 2018 Clicks: 155
-
The vacuum coating machine for plastic surface spraying processing is a transpiration type coating equipment. Its spraying processing principle is that under vacuum, the metal or non-metallic materials placed on the tungsten wire are heated by electricity. When the tungsten wire reaches a certain temperature, the coating materials will evaporate into steam molecules or atoms; Due to the average self
Published on: September 11, 2018 Clicks: 195
-
The distance between the gun mouth of the spraying machine of the spraying processing factory and the surface of the coated object is called the gun distance, and the distance between the metal spraying guns should be 300~400mm. If the gun spacing is too small, the spraying pressure is too large, and the recoil force is also large, the uneven coating is easy to occur, and the spraying amplitude (sector width) is small, so that the local spraying of the coated material
Published on: October 8, 2018 Clicks: 178
-
The production of powder coating spraying room for spraying processing is a key process in the spraying production process. The key to the quality of the sprayed profile surface is the control of various process parameters in the spraying process. Powder output and atomizing air are two key technical indicators. Before formal powder spraying, try spraying several times. At this time, observe the powder output at both ends of the spraying room
Published on: October 12, 2018 Clicks: 182
-
The surface of most workpieces needs to be painted, and most of them can obtain outstanding coating to improve the quality of workpieces. However, sometimes I feel that the painting process is not very smooth, which leads to the problem of rough appearance after the painting process, especially fluorocarbon painting. Why&
Published on: October 27, 2018 Clicks: 200
-
In the past spray painting process, the specific operation process must be selected in combination with the type of paint. Due to different paint performance, the applicable spray painting processing methods will be different, which is also the basic requirement of the spray painting processing manufacturer Tuoshen for surface treatment to ensure the quality of spray painting processing&
Published on: November 6, 2018 Clicks: 174
-
In recent years, with the rapid development of the plastic industry and the continuous improvement of the plastic function, plastic parts have been more widely used. Plastic parts are replacing traditional metal parts in different fields
Published on: November 13, 2018 Clicks: 161
-
Although dust-free spraying process is a conventional treatment process, there are also potential safety hazards in the whole operation process, which come from all aspects of spraying process. In order to ensure the safety of the whole process, it is necessary to make full preparations from the overall environment, processing equipment, operation process and other aspects& nbs
Published on: November 21, 2018 Clicks: 139
-
The question of paint components and functional characteristics introduced by the paint processing factory is the same as that of metal materials. Paint processing is also required in many times, and the paint used in this aspect will be special. What are the components of paint used in Guangzhou spray painting processing,
Published on: November 17, 2018 Number of hits: 108
-
Precautions for dry fog spraying in Huadu Spray Processing Factory In various production and processing processes, the importance of paint coating is increasingly obvious. They are not only for mechanical spraying, but also for rust prevention. In modernization
Published on: November 26, 2018 Clicks: 96
-
As a new spray processing technology, electrostatic spraying is not only safe and non-toxic, but also will not pollute the environment. However, since the shapes of the objects to be sprayed are different, it is inevitable that some dead corners will lead to poor powder application during the spraying process
Published on: November 30, 2018 Clicks: 770
-
The intention and operation method of paint stripping in the dust-free spraying processing coating process are more and more likely to appear under the trend of gradually developing powder coating. The so-called paint stripping is actually a process of removing the film, which is also in the coating process
Published on: December 11, 2018 Clicks: 101
-
There are many reasons for the roughness of the surface of the workpiece after spraying in the factory. Most of the surfaces of the workpiece need to be painted, and most of them can get a good coating to improve the quality of the workpiece. But sometimes I feel that the painting process is not
Published on: December 7, 2018 Number of hits: 176
-
Some defects in the spraying process will affect the appearance quality and use performance of the product. Tuoshen Surface Treatment, a spraying processing manufacturer, constantly improves its processing skills to produce high-quality and beautiful plastic spraying products for you. Please contact us. Analysis of the cause of formation of particles during spraying processing: there are burrs, aluminum chips and graphite marks on the surface of the substrate, and the pretreatment is poor; Pretreatment
Published on: 2019-05-27 Number of hits: 200
-
As one of the most popular hardware processing technologies in the current market, the spray processing of Guangzhou spray processing manufacturers is widely used in various fields, and the adhesion of spray processing is the basic reference index for judging its processing quality. If the spray adhesion of the workpiece cannot be guaranteed, then other performances are difficult to guarantee. What factors affect the adhesion of workpiece spraying& nbs
Published on: June 15, 2021 Clicks: 171
